Electrode Processing Lines
Critical for preparing electrodes before cell assembly. These systems support both small- and large-scale production.
Mixing Machine
Homogenises active material, binder, and solvent to create a stable slurry for coating.
Mixing Machine Specifications
| Capacity - Chamber | 5 Liter |
|---|---|
| Capacity - Working | 3 Liter |
| Capacity - Up-down | Hydraulic motor driven |
| Vessel - Material | STS304 |
| Vessel - Buffer | Inside #300, Outside #200 |
| Vessel - Nozzle Position | Side, can be specified by customer |
| Vessel - Jacket | Cooling Water, 0.1Mpa |
| Planetary - Impeller | 90° Twist Blade (2ea) |
| Planetary - Motor | 1.5kW × 60Hz × 3Phase |
| Planetary - Revolution | 68rpm (revolution), 180rpm (rotation) |
| Disperser - Impeller | Saw Disc Type |
| Disperser - Motor | 1.5kW × 60Hz × 3Phase |
| Disperser - Rotation | Max. 3,000rpm |
| Control Panel - Operation Type | PLC Control, Touch Screen 8.4" |
| Control Panel - Auto-Set Parameter | rpm, time, temperature, step |
| Control Panel - Manual Display | High speed rpm, Low speed rpm, Timer, Temp, Step |
| Cooling Unit | DAEHO Cooler, M3 |
| Vacuum Pump | KNF, N820.3FT.18 |
| Ultimate Vacuum | 85% |
| Power | AC220 or 380V ±10%, 50/60Hz |
| Dimension & Weight | 700(W) × 1500(D) × 1350(H)mm, Approx. 1Ton |
Coating Machine
Applies the electrode slurry evenly onto metal foil (cathode/anode) with tight thickness control.
Coating Machine Specifications
| Coating Type | Comma Reverse, Slot Die (option) |
|---|---|
| Coating Mode | Continuous & Intermittent |
| Foil Width | Max. 350mm |
| Coating Width | Max. 200mm |
| Un-winding Unit | AC Servo Motor Torque PID Real Time Control Range 15N ~ 100N |
| Re-winding Unit | AC Servo Motor Torque (Tension Detector Applied) PID Real Time Control Range 15N ~ 100N |
| Coating Roller Width | Ø 160mm × 250mm Width |
| Coating Speed | 0.5m ~ 5m/min (Max. 10m/min) |
| Slurry Supply | Manual |
| Dryer Type | Heated Air Convection Dryer (Circulation of Heated Air from upper and Lower Nozzle) |
| Dryer Zone Length | 1.2m × 3Zone = 3.6Meter |
| Power | 380V / 3Phase / 60Hz (Approx. 55kW) |
| Dimension & Weight | Approx. 5800(W) × 1600(D) × 2420(H)mm Approx. 5.5ton |
Roll Press Machine
Compresses the coated foil to increase density and improve adhesion, enhancing energy performance.
Roll Press Machine Specifications
| Foil Width | Max. 350mm |
|---|---|
| Coated Width | Max. 300mm (full coating, pattern coating) |
| Un-winding Unit | 1-Axis Cantilever & Air Expansion |
| Pressing Unit - Gap Control | Screw & Taper Block |
| Pressing Unit - Pressing Type | Heating Roller (Winding type) |
| Pressing Unit - Pressing Mode | Hydraulic Pack System |
| Pressing Unit - Pressing Temp. | Max 150°C (Normal 80°–100°C) |
| Pressing Unit - Machinery Speed | 10m/min (Normal 2–5m/min) |
| Pressing Unit - Heating Source | Electrical Cartridge Heater |
| Re-winding Unit | 1-Axis Cantilever & Air Expansion |
| Power | AC 380V, 3 phase, 60 Hz / 10Kw |
| Dimension & Weight | Approx. 1700(W) × 1600(D) × 1500(H)mm, Approx. 3Ton |
Slitting Machine
NEEDS PECS AND IMAGES
Certificates
We are proud to have been awarded ISO 9001 certification, an internationally recognised standard that ensures services meet the needs of clients through an effective quality management system. Our decision to work towards ISO 9001 certification demonstrates our commitment to providing a high-quality and consistent service to our clients and our ongoing investment in technology, development and processes and procedures.
You can download a copy of our ISO 9001 : 2015 certificate here.
You can download a copy of our ISO 14001 : 2015 certificate here.
You can download a copy of our ISO 45001 : 2018 certificate here.
